Skip to main content

Welcome to Everest Motors Ltd

Home  Online Part Shop  Products & Services  Site Map  About Us  Contact Us  Member Login   
M.O.T > Full Service > Vehicle Repairs > Diagnostics > Exhausts Systems > Braking Systems > Tyres & Alignment > Ignitions Systems >  
What the MOT test includes

The MOT looks at some important items on your car to see that they meet key legal requirements at the time of the test.

Body or vehicle structure and general items

Free from excessive corrosion or damage in specific areas. No sharp edges likely to cause injury. Towbars for security, condition, inappropriate repairs or modification. Correct operation of 13 pin electrical socket. Speedometer condition and operation. Engine mountings.

Fuel system

No leaks. Security and condition of pipes or hoses. Fuel cap fastens and seals securely. Note the fuel cap will need to be opened. Make sure the key is available.

Exhaust emissions

Vehicle meets the requirements for exhaust emissions, dependent on the age and fuel type of the vehicle.

Exhaust system

Secure. Complete. Catalyst missing where one was fitted as standard. Without serious leaks and is not too noisy.

Seat belts

All the seat belts fitted are checked for type, condition, operation and security. All mandatory seat belts must be in place. Check of the malfunction indicator lamp (MIL) for air bags and seat belt pre tensioners.

Seats

Driver's seat can be adjusted. All seats for security and seat backs can be secured in the upright position.

Doors

Latch securely in closed position. Front doors should open from inside and outside the vehicle. Rear doors should open from outside the vehicle. Hinges and catches for security and condition.

Mirrors

Minimum number required, condition and security.

Load security

Boot or tailgate can be secured in the closed position.

Brakes

Condition including inappropriate repairs or modifications, operation and performance (efficiency test). Note the removal of the road wheels and trims are not part of the test. ABS or electronic stability control (ESC) where fitted. Check of the MIL for ABS, electronic stability control, electronic park brake and brake fluid warning.

Tyres and wheels

Condition, security, tyre size and type and tread depth. Spare tyres are not inspected. Note: vehicles first used on or after 1 January 2012 - check of the MIL for tyre pressure monitoring.

Registration plates

Condition, security, colour, characters correctly formed and spaced.

Lights

Condition, operation including HID and LED headlamps for cleaning, self levelling and security. Headlamp aim. Main beam warning light.

Bonnet

Securely latches in the closed position.

Wipers and washers

Operate to give the driver a clear view ahead.

Windscreen

Condition and driver’s view of the road.

Horn

Correct operation and of suitable type.

Steering and suspension

Condition, steering oil level, operation, a check for inappropriate repairs or modification including corrosion to power steering pipes or hoses. Operation of steering lock mechanism. Check of the MIL for electronic power steering and steering lock.

The vehicle identification number (VIN)

Is on vehicles first used on or after 1 August 1980. Only one unique VIN is displayed except on multistage build vehicles.


How vehicles are tested

MOT test stations have designated test bays where they conduct the test, using a range of equipment that meets the required specification for MOT testing. The standard test procedures are laid out in an inspection manual that the test station should make available on request.

If your vehicle has failed the test, you’ll be given a failure document with reference to this manual. You can watch the test from a designated viewing area but you are not allowed to interrupt the tester while he is working.

All MOT testers have been on a training course with the Vehicle and Operator Services Agency (VOSA) and their test results are checked regularly.

Who supervises the scheme?

VOSA is the government agency responsible for supervising the MOT scheme. It does this by:

  • authorising MOT test stations and approving MOT testers
  • setting standards for testing and requirements for authorisation for the MOT test station and testers
  • training authorised examiners and MOT testers
  • visiting MOT test stations and carrying out checks to ensure testing standards and facilities are maintained
  • giving advice and taking disciplinary action where tests are not being carried out to the required standards
  • dealing with appeals and complaints from MOT customers

Check your M.O.T status below: